If you want to repaint your vehicle on your own and achieve that trendy look, then it is important to get all the information you can get about the paint that you will use. You will need to choose the tools to use wisely, select that part of the garage that is well ventilated ie […]
If you want to repaint your vehicle on your own and achieve that trendy look, then it is important to get all the information you can get about the paint that you will use. You will need to choose the tools to use wisely, select that part of the garage that is well ventilated ie where there is free passage of air.
All automotive paints are not the same but there are some few qualities that you need to ascertain before you buy the paint for your car. Any paint that you use should not be polished after application unless it is of poor quality. Paint should always be flexible without the use of flex additives. To improve paint coverage, use paint primer as an undercoating.
When dealing with a minor repair or even a full restoration, preparation is absolutely necessary. Clean the surface that you are using. There are two types of contaminants that will need to be cleaned, these are Water based contaminants, such as dirt, dust and bird droppings. These can be removed easily with a good car washing soap and hot water. And then there are Solvent based contaminants that include wax, plastic resin, oil and tar grease. These require the use of grease remover. In order to know that the area is clean, flush it with water. The water should not stick on this surface, if it does you will need to add more grease remover.
Before applying the automotive paint that you desire, you can remove the old paint using solvent based color removers, making a smooth base on your car body. You are now ready to use a primer on these surface. Use a top quality spray gun, applying sweeping horizontal strokes back and forth. Let the coat dry before sanding it again and applying a fresh coat.