When it comes to hardwood floor refinishing, homeowners should know that planning and patience and skill won’t be enough as they ought to have specialized equipment as well. Out of all the home improvement projects that homeowners can undertake, this one is something that requires research, knowledge and time. You’ll be going through a series of steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.
In any of the said steps or stages, just a slight touch of error is more than enough to lead to problems that may last for long. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring.
Step 1. Checking the hardwood floor – you’ll have to determine whether or not the hardwood floor planks will be a laborious process. It is essential to assess the floor if it has suffered from water, pet urine or spills. In order to see if the boards are so thin to be sanded, you may pull up one threshold of the door. In addition to that, it is vital that you find out if the last sealant was varnish, wax or polyurethane. You have to examine the hardwood flooring to be able to see if they have deep gouges or dramatic wear patters.
Finding Similarities Between Options and Life
Step 2. Preparing the flooring – you must prepare the flooring first before you do hardwood floor refinishing. You’re all set to start with the preparation in case that most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant.
News For This Month: Flooring
Cleaning the whole floor area is the first thing that you’ve got to do. It is vital as well to file holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good.
Step 3. Sanding – this is probably the most daunting and the most demanding step that you would ever do. You’ll have to rent a drum sander equipment, it’s loud to use and you have to roll it on the entire hardwood flooring 3x to be able to peel off the top layer of the finish.
Step 4. Staining and sealing – before you get started on this step, you have to be sure that every single bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. After staining the floors, you have to seal it with thin layer of sealant to ensure that the stain is completely dry before applying it.